-
HYPACK MAX & HYSWEEP Software Equipment rental to supply a license of HYPACK & HYSWEEP acquisition and processing software. Comes with USB hard lock key for activation and software may be downloaded from manufacturer's website. -
HYPACK OFFICE: is the survey data processing and final products version of HYPACK MAX. It supports processing and final products, from any survey data collected with MAX (excludes multibeam and LiDAR. -
HYPACK OFFICE & HYSWEEP OFFICE HYPACK OFFICE & HYSWEEP OFFICE: The OFFICE COMBO is recommended for planning, editing and generating final products from anytype of survey data collected using the MAX or HYSWEEP modules.
-
HYPACK SURVEY HYPACK SURVEY: is the data collection-only software, where editing and final products are being handled by other means. It has no editing or final product tools. SURVEY supports survey mission planning, navigation, and data acquisition from various sensors, except multi beam and LiDAR devices. -
HYPACK SURVEY & HYSWEEP: is the recommended combination when outfitting a multibeam survey vessel, ASV or USV. SURVEY & HYSWEEP supports logging any kind of data supported by HYPACK software products (MAX and HYSWEEP). It also supports data processing; however final product generation is not supported with this license. -
HYPACK VIPER: Visualization of environmental sensor data. Choose from over 50 sensor variables and view them in profile, gradient or spreadsheet view. -
HYPACK WATER QUALITY MAPPING: is the software for environmental sensor (water quality and velocity) data collection and processing. The WATER QUALITY MAPPING license includes support for various water quality sensors (up to 32 parameters), acoustic Doppler current profilers (ADCPs) and basic bathymetric mapping. -
Impact Subsea FMD System Equipment to supply a titanium FMD instrument, ROV probe holder, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, transit case and FMD license. -
Impact Subsea FMD System Equipment rental to supply a titanium FMD instrument, ROV probe holder, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, transit case and?FMD?license.
-
Impact Subsea ISA500 Altimeter Equipment to supply of 6k Depth rated 500kHz Altimeter, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. - 400-600kHz tunable (500kHz Standard) - 0.1 to 120m altitude range - 1mm resolution - 6" conical beamwidth at 500kHz -
Impact Subsea ISA500 Altimeter Equipment rental to supply of 6k Depth rated 500kHz Altimeter, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. - 400-600kHz tunable (500kHz Standard) - 0.1 to 120m altitude range - 1mm resolution - 6" conical beamwidth at 500kHz
-
Impact Subsea ISD4000 Depth Sensor Equipment to supply an Underwater depth (pressure) and temperature sensor with titanium housing and integrated AHRS (roll, pitch, heading sensor). Comes with 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. Pressure rating: 300dBar -
Impact Subsea ISD4000 Depth Sensor Equipment rental to supply an Underwater depth (pressure) and temperature sensor with titanium housing and integrated AHRS (roll, pitch, heading sensor). Comes with 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. Pressure rating: 300dBar
-
Impact Subsea ISFMD System Full System (Diver & ROV Ready, 200m Cable) Full System (Diver & ROV Ready, 200m Cable) -
Impact Subsea ISFMD System ROV Only System ROV Only System -
Impact Subsea ISFMD System Software License -
Impact Subsea ISFMD System Topside Interface Box -
Impact Subsea ISM3D Motion Sensor, Titanium 6k Rated Equipment to supply Underwater Attitude and Heading Reference System (AHRS) with Titanium or Acetal housing and selectable Inertial Mode. Comes with 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. -
Impact Subsea ISM3D Motion Sensor, Titanium 6k Rated Equipment rental to supply Underwater Attitude and Heading Reference System (AHRS) with Titanium or Acetal housing and selectable Inertial Mode. Comes with 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case.
-
Impact Subsea ISS360 Compact Imaging Sonar Equipment to supply a small and portable Compact Imaging scanning sonar system. Comes with a titanium instrument, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. -
Impact Subsea ISS360 Compact Imaging Sonar Equipment to supply a small and portable Compact Imaging scanning sonar system. Comes with a titanium instrument, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case. -
Impact Subsea ISS360 Compact Imaging Sonar Equipment rental to supply a small and portable Compact Imaging scanning sonar system. Comes with a titanium instrument, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case.
-
Impact Subsea ISS360 Compact Imaging Sonar Equipment rental to supply a small and portable Compact Imaging scanning sonar system. Comes with a titanium instrument, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case.
-
Innomar Compact SubBottom Profiler Equipment rental to supply an Innomar Compact Sub-Bottom Profiler. Comes with topside interface, pole mountable transducer with built in 20-meter deck cable, accessory kit, SES-WIN control software, mounting hardware, and transit cases. -
Innomar Compact SubBottom Profiler Equipment rental to supply an Innomar Compact Sub-Bottom Profiler. Comes with topside interface, pole mountable transducer with built in 20-meter deck cable, accessory kit, SES-WIN control software, mounting hardware, and transit cases.
-
Included Features
- Heave, Roll and Pitch beam stabilization
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (full SLF band)
- Barker coded pulses for safe bottom track also in multi-ping modes
- Linear sub-bottom profiler / SBES echosounder mode (12/15/18 kHz CW and 12 – 18 kHz FM chirp pulses)
- Bottom slope control
- KVM extender for remote control
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
- Transducer frame with integrated shock absorbers for hull-mounting
-
Included Features
- Heave / Roll beam stabilization
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (2 – 7 kHz)
- KVM extender for remote control
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
- Transducer frame with integrated shock absorbers for hull-mounting
-
Overview
- Processing of all Innomar data formats, including SES3 files.
- Handling of 16/24/32-bit and multi-channel data files.
- Similar "look'n'feel" as the Innomar SESWIN on-line control and data acquisition software.
- Intuitive handling of 2D data sections with free zoom levels and undo/redo.
- Project-based workflow, but can also be used to view/process single data files.
- Integrated GIS-browser builds the file handling base.
- GIS map synchronized with seismic section view (cursor, track cross-points, picked targets and ground-truth positions).
- Processed and interpreted data can be exported into various industry-standard data formats, including ASCII, DXF, 3D grids.
-
Overview
- Processing of all Innomar data formats, including SES3 files.
- Handling of 16/24/32-bit and multi-channel data files.
- Similar "look'n'feel" as the Innomar SESWIN on-line control and data acquisition software.
- Intuitive handling of 2D data sections with free zoom levels and undo/redo.
- Project-based workflow, but can also be used to view/process single data files.
- Integrated GIS-browser builds the file handling base.
- GIS map synchronized with seismic section view (cursor, track cross-points, picked targets and ground-truth positions).
- Processed and interpreted data can be exported into various industry-standard data formats, including ASCII, DXF, 3D grids.
-
Included Features
- SLF full waveform data acquisition (sub-bottom data) / Innomar "RAW" data format
- 24 bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
-
Included Features
- Heave / Roll beam stabilization
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (5 – 15 kHz)
- KVM extender for remote control
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
-
Included Features
- Heave / Roll beam stabilization
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (3 – 12 kHz)
- KVM extender for remote control
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
- Transducer frame with integrated shock absorbers for hull-mounting
-
Included Features
- Roll or Pitch beam stabilization
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (5 – 15 kHz)
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
- external AC power adapter (100–240 V AC)
-
Equipment rental to supply an Innomar Medium-100 USV Sub-Bottom Profiler. Comes with topside interface with OUT PC, pole mountable transducer with 15-meter deck cable, accessory kit, SES-WIN control software, mounting hardware, and transit cases.
-
Included Features
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
-
Included Features
- Heave / Roll (or Pitch) beam stabilization
- 16-bit SLF full waveform data acquisition (sub-bottom data) / Innomar "RAW" data format
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (5 – 15 kHz)
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
Contact us at +1 (706) 522-3022
TOP NEWS!
481 S. Jackson Street
Hartwell, GA 30643
Shop
Your account
Subscribe to our newsletter.
Join our emailing list to receive all up-to-date information from ECHO81
© Copyright 2016 - 2025 | ECHO81 | All Rights Reserved | Powered by ECHO81