- Ultra-high resolution imagery for easier identification of targets
- Lightweight for one person deployment
- Dual simultaneous frequencies
- Choice of either a 400/900 kHz or 600/1600 kHz towfish
- Standard heading, pitch, roll and depth sensors
- Topside processor and laptop for open boat operations
- Runs on AC or DC
- Sets up in minutes and is easy to operate
- Optional quick change tow bracket for hull inspections
- System is supplied in rugged portable cases for easy transport
-
EdgeTech 4125i Side Scan Sonar System -
Equipment rental to supply a towed EdgeTech 4125i SS sonar system. Comes with portable topside interface unit, splashproof laptop with Discover control software, AC power cord, Ethernet cable, mini-USB-GPS receiver, 50-meter tow cable, and shipping cases. -
EdgeTech 4125i Depressor Wing Kit 18" V-wing Depressor Tow Key, Center Support Mount, Tow Point Hinge, Shear Pin, Cable Clip -
The next generation 4205 is a versatile side scan sonar system that can be configured for almost any survey application from shallow to deep water operations. The 4205 utilizes EdgeTech’s Full Spectrum® CHIRP technology to provide crisp, high resolution imagery at ranges up to 50% greater than non-CHIRP systems; thus allowing customers to cover larger areas and save money spent on costly surveys. -
- Tri frequency side scan sonar
- Motion tolerant mode
- Improved target positioning
- Crisp, high resolution CHIRP images
- Increased towfish power to support a wider range of additional 3rd party sensors
- Single pulse high resolution mode
-
EdgeTech 2 Foot Depressor Wing Kit for 4205 Series Towfish 2-foot V-Wing Depressor Tow Key, Center Support Mount, Tow Point Hinge, Shear Pin, Cable Clip -
This shallow water configuration comes with a single 4-24 kHz transducer and PVDF receiver array configuration. It is designed to be pole-mounted and can be used on small vessels. -
EdgeTech 3400-OTS Lightweight Sonar Head (2-16 kHz) 3400 Topside Processor in 2U case Splashproof Laptop Computer with Sunlight Readable Display and DISCOVER SBP Software Topside configured for use with a 3400 OTS Light (2-16 kHz) sonar head -
EdgeTech 3400 Dual 216 Towfish System With Tow Bridle Consisting of part numbers SS-6c / 0021464 / 0021312 / 0007561 3400 Topside Processor in 2U case, complete with Splashproof Laptop Computer with Sunlight Readable Display and DISCOVER SBP Software 3400 Dual 216 Towfish with Tow Bridle, Dual 2-16 kHz Chirp Transmitters Large Multi-Channel PVDF Receiver Array Motion, Depth & Heave Sensors Dual Frequency Transmission, Pipeline Survey Mode & user-selectable Pulses 50m Kevlar Reinforced Multiconductor Tow Cable & Tow Cable Clamp -
EdgeTech 3400 Dual 216 Towfish System With Tow Bridle & 4 kW Amplifier Consisting of part numbers SS-6d / 0021464 / 0021312 / 0007561 3400 Topside Processor with 4KW Amplifier and Rackmount PC pre-installed with Discover SBP Acquisition & Display software, Keyboard, Trackball, 24" LCD Monitor 3400 Dual 216 Towfish with Tow Bridle Dual 2-16 kHz Chirp Transmitters Large Multi-Channel PVDF Receiver Array Motion, Depth & Heave Sensors Dual Frequency Transmission Pipeline Survey Mode & user-selectable Pulses 50m Kevlar Reinforced Multiconductor Tow Cable & Tow Cable Clamp -
EdgeTech 3400-OTS Low Frequency Pole-Mount Sub-Bottom Profiler (1-10 kHz) & 4 kW Amplifier Consisting of part numbers: SS-6e / 0021312 / 0022762 3400 Topside Processor with 4KW Amplifier and Rackmount PC pre-installed with Discover SBP Acquisition & Display software, Keyboard, Trackball, 24" LCD Monitor 3400-OTS Low Frequency Digital Profiler with Dual 1-10 kHz Chirp Transmitters Large Receiver Array Stainless Steel Frame for installation on client supplied Pole Motion, Depth & Heave Sensors Dual Frequency Transmission, User selectable Pulses 50m Kevlar Reinforced Multiconductor (1.47cm/0.58?) Tow Cable -
EdgeTech ASSY Top 3400 Pole Mounted Sonar Head Model 3400 OTS Digital Profiler with Dual 2-16 kHz Chirp Transmitters Large Multi-Channel Receiver Array Motion, Depth & Heave Sensors Dual Frequency Transmission Pipeline Survey Mode User-selectable Pulses Supplied with Pole Mount Adapter Bracket -
EdgeTech ASSY Top 3400 Combined Towed And Pole Mounted Sonar Head Model 3400 Digital Towfish with Removable Pole Mount Attachment Dual 2-16 kHz Chirp Transmitters Large Multichannel Receiver Array Motion, Depth & Heave Sensors Dual Frequency Transmission Pipeline Survey Mode User selectable Pulses -
This over-the-side configuration is designed to be pole-mounted off the side of a vessel. It consists of a dual 1-10 kHz transducer and PVDF receiver array configuration. It provides for deeper water operations than the towed 3400 Sub-Bottom profilers. This type does support an amplifier option.
-
EdgeTech Topside Processor With Starmux IV Interface 19" rack mountable StarMux IV Digital Interface 19" rack mountable Processor PC with EdgeTech's DISCOVER Software for data acquisition and replay Dual LCD Monitors, Keyboard & Trackball Technical Manual and Ruggedized Shipping Crate -
EdgeTech 2300 Combined Tri-Frequency Side Scan Sonar 120/410/850 kHz & High Resolution Sub-Bottom Profiler Towfish Towfish with 120/410/850 kHz Tri-Frequency Transducers with capability to display and record any two Side Scan Sonar Frequencies simultaneously on command via Discover Software Sub-Bottom Profiler comprises Four (4) 1-10 kHz CHIRP Transducers with high sensitivity PVDF Receive Array provide a focused, narrow beam pattern for superior imagery 2,000m Depth Rating Towfish also includes a depth sensor, magnetometer interface and SBG Ellipse Pitch, Roll & Heading Sensor An ROV interface (48v dc power in, and ethernet comms) connection is available allowing direct communications with a customer's Mux Includes 15m Test Cable, Technical Manual, Accessory Kit, and Shipping Crate -
EdgeTech 2300 Combined Tri-Frequency Side Scan Sonar 230/540/850 kHz With 540 kHz 3D Bathy & High Resolution Sub-Bottom Profiler Towfish Towfish with 230/540/850 kHz side scan sonar Tri-Frequency Transducers with 540 kHz bathymetry with capability to display and record any two Side Scan Sonar Frequencies simultaneously on command via Discover Software Sub-Bottom Profiler comprises Four (4) 1-10 kHz CHIRP Transducers with high sensitivity PVDF Receive Array provide a focused, narrow beam pattern for superior imagery 2,000m Depth Rating Towfish also includes a depth sensor, magnetometer interface and SBG Ellipse Pitch, Roll & Heading Sensor An ROV interface (48v dc power in, and ethernet comms) connection is available allowing direct communications with a customer's Mux Includes 15m Test Cable, Technical Manual, Accessory Kit, and Shipping Crate
-
- Option for integrated OEM Inertial Navigation System
- 4th generation MPES (Multi-Phase) technology
- Co-registered simultaneous dual frequency side scan data
- Bathymetry data which is IHO SP-44 Special Order compliant
- Gap-fill side scan sonar and bathymetry data
- Bathymetry backscatter data
- Motion Tolerant side scan data
- Swath sectors of up to 200° means far shorter time for data collection
- Optimized Bathymetry modes: Equidistant and Equiangular
- EdgeTech’s Discover Bathymetric control software
- Integrated sound velocity sensor
- Unrivaled swath coverage and resolution in shallow water when compared to other MBES or PDBS sonar.
-
EdgeTech Laptop -
DREDGEPACK: is the complete dredging solution. This license enables control of cutter suction, hopper, excavator, and bucket dredge operations. Improve efficiency and monitor the digging operations with DREDGEPACK, providing the design tools to accurately model almost any dredge plan. This license is not for hydrographic surveying. -
HYSWEEP OFFICE: is the data processing and final products version of HYSWEEP. HYSWEEP OFFICE supports processing any data collected with the HYSWEEP module. -
HYSWEEP is the module for planning, collection, and processing of multibeam, backscatter, LiDAR, and water column data. HYSWEEP requires a HYPACK (SURVEY or MAX) license for data collection. The SURVEY or MAX license can be upgraded to support multibeam and LiDAR by adding the HYSWEEP? module. -
HYPACK SURVEY & HYSWEEP: is the recommended combination when outfitting a multibeam survey vessel, ASV or USV. SURVEY & HYSWEEP supports logging any kind of data supported by HYPACK software products (MAX and HYSWEEP). It also supports data processing; however final product generation is not supported with this license.
-
HYPACK OFFICE & HYSWEEP OFFICE HYPACK OFFICE & HYSWEEP OFFICE: The OFFICE COMBO is recommended for planning, editing and generating final products from anytype of survey data collected using the MAX or HYSWEEP modules.
-
HYPACK LITE: is the data collection and processing software for all the sensors supported by SURVEY. LITE includes data collection aspects from SURVEY, with the addition of processing tools for the same sensor suite. The data products from LITE can be exported to CAD or GIS. -
HYPACK SURVEY HYPACK SURVEY: is the data collection-only software, where editing and final products are being handled by other means. It has no editing or final product tools. SURVEY supports survey mission planning, navigation, and data acquisition from various sensors, except multi beam and LiDAR devices. -
HYPACK OFFICE: is the survey data processing and final products version of HYPACK MAX. It supports processing and final products, from any survey data collected with MAX (excludes multibeam and LiDAR.
-
HYPACK ECHO: is the basic and economical software package for single beam bathymetric surveys. ECHO supports single vessel (remote, autonomous or traditional) single beam (including dual frequency) survey mission planning, navigation, data acquisition and processing. ECHO includes HYPACK Single Beam Editor for data review, cleaning, thinning, and generating XYZ files and exporting DXF contours. -
HYPACK WATER QUALITY MAPPING: is the software for environmental sensor (water quality and velocity) data collection and processing. The WATER QUALITY MAPPING license includes support for various water quality sensors (up to 32 parameters), acoustic Doppler current profilers (ADCPs) and basic bathymetric mapping.
-
HYPACK GEOPHYSICS combines all of the tools required for geophysical surveys in a centralized, easy to use interface. GEOPHYSICS supports side scan, sub-bottom and magnetometer survey planning, navigation, and processing, including interfaces for more than 30 devices. GEOPHYSICS includes search and recovery (SAR) survey and targeting tools. Collect and mosaic side scan data in real-time or in postprocessing.
-
HYPACK VIPER: Visualization of environmental sensor data. Choose from over 50 sensor variables and view them in profile, gradient or spreadsheet view. -
Impact Subsea ISFMD System Full System (Diver & ROV Ready, 200m Cable) Full System (Diver & ROV Ready, 200m Cable) -
Impact Subsea ISFMD System ROV Only System ROV Only System -
Impact Subsea ISFMD System Software License -
Impact Subsea ISFMD System Topside Interface Box -
Included Features
- Heave / Roll beam stabilization
- 24-bit SLF full waveform data acquisition / Innomar "SES3" data format
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (5 – 15 kHz)
- KVM extender for remote control
- SESWIN basic remote-control via COM / UDP (e.g. line start/stop, line name)
